We are open and ship same or next day! *** Get 10% Off and FREE Shipping on ALL ORDERS during the lockdown.

Instructions: Jeany's Cutting Edge Gun Lube, Mike's Ultimate Detailer


Instructions for Jeany's Cutting Edge Gun Lube
  1. Assure that the gun is unloaded before starting!
  2. Shake well before use.
  3. For first time use and best results, clean gun well including the bore, making sure the gun is totally dry, to remove all trace of old lubricant.  This will help the nanoparticles bond to the gun’s metal parts.
  4. Apply liberally to the gun's metal parts, especially the moving parts and action. Do not apply to the guns furniture.
  5. Optionally, warm gun with hair dryer to help the nanoparticles bond to the metal.
  6. Spray some lube down the bore and chamber wait overnight and run clean patches through until dry. If storing the gun, run a wet patch down the barrel to coat the bore and chamber to protect from rust. Bore will stay cleaner.
  7. Wipe off excess lube from the outside of gun.
  8. Ideally, let the gun sit overnight and add a little more lube to dry areas letting the gun sit overnight again.
  9. Use gun and enjoy how easy it is to clean up after.
  10. You can simply just start using this lube without all the prior steps but it will take several usages and cleanings for the nanoparticles to bond and the gun will gradually start to get easier and easier to clean.

 

KEEP OUT OF REACH OF CHILDREN

Skin and eye irritant. SKIN: Wash hands or other areas of contact with soap and water after use. EYES: Flush with water for 15 minutes lifting eyelids. Get medical attention if necessary. INGESTION: Seek immediate medical attention Use in a well-ventilated area

 

Instructions for Mike's Ultimate Detailer
  1. Shake well before use
  2. Hold about 10” from surface and spray a 12” x 12” area, wet surface
  3. Use a folded microfiber or soft terrycloth to wipe area clean, flip towel and buff to a shine.
  4. Super dirty areas may require a more thorough wetting and soaking for 30 seconds to a minute. Repeat if needed, don’t scrape. Avoid grinding dirt into the paint.
  5. If the surface streaks, use a clean and dry cloth, spray a very light mist then buff to a shine.

*Not for cloth or suede interiors parts

**Do not apply to brake parts, shoe soles, flooring, tire tread areas or any surface where reduced grip may cause injury.

KEEP OUT OF REACH OF CHILDREN

Skin and eye irritant. SKIN: Wash hands or other areas of contact with soap and water after use. EYES: Flush with water for 15 minutes lifting eyelids. Get medical attention if necessary. INGESTION: Seek immediate medical attention.